YOU MIGHT ALSO LIKE
ASSOCIATED TAGS
deionization  distillation  laboratory  membrane  metals  molecular  molecules  organics  osmosis  purity  resins  resistivity  reverse  theoretical  volatile  
LATEST POSTS

How to make water 100% pure?

Pure water can be produced by a combination of distillation, reverse osmosis, and deionization, but true 100 % purity is a theoretical ideal that cannot be maintained in an open system.

What purity really means

In chemistry, water is H₂O molecules. Even in the cleanest laboratory water, a tiny fraction of molecules split into H₃O⁺ and OH⁻, giving a pH of 7.0 at 25 °C. Gases from the air, mainly CO₂, dissolve quickly and lower pH to about 5.6–6.5.

Measurement standards

Purity is measured by resistivity, total organic carbon, and particulate count. The highest class, Ultra‑Pure Water (UPW), has a resistivity of 18.2 MΩ·cm, the theoretical maximum for water at 25 °C.

Distillation – the first step

Heating water to 100 °C causes H₂O to vaporise. Non‑volatile salts, heavy metals, and most high‑molecular‑weight organics stay in the boiling chamber. Single‑pass distillation can leave entrained droplets and volatile organics in the condensate; double distillation or a multi‑effect still removes these more effectively.

Reverse osmosis – the membrane filter

Pressurising water against a thin‑film composite membrane forces only water molecules through, leaving ions, metals, and small organics behind. RO systems are often followed by ion‑exchange resins to remove the few ions that slip through.

Deionization – final polishing

Mixed‑bed resins exchange H⁺ and OH⁻ ions for H₂O. After deionization, the water’s resistivity can approach 18.2 MΩ·cm, but the process is sensitive to any leachable material from the system’s components.

Why true 100 % purity is impossible

Water in contact with air absorbs CO₂, and any container leaches trace ions. The second law of thermodynamics means that a system can never remain perfectly ordered; contamination will always re‑enter the water. Thus, 100 % purity is a theoretical limit, not a practical reality.

Maintaining ultra‑pure water in practice

  • Use closed‑loop systems to minimise air contact.
  • Employ stainless‑steel or fluoropolymer components to reduce leaching.
  • Regularly replace membranes and resins.

When you need less than ultra‑pure water

For most laboratory and household uses, distilled or deionized water (resistivity 0.1–1 MΩ·cm) is sufficient. Ultra‑pure water is reserved for semiconductor fabrication, HPLC, and molecular biology.

❓ Frequently Asked Questions

1. Can I achieve 100 % pure water at home?

Home distillation or reverse osmosis can produce very clean water, but atmospheric CO₂ and container leaching will always introduce trace impurities.

2. What is the maximum resistivity achievable?

The theoretical maximum for pure water at 25 °C is 18.2 MΩ·cm, corresponding to a very low ion concentration.

3. Does ultra‑pure water stay pure indefinitely?

Only in a sealed, inert environment. In open containers, CO₂ absorption and surface leaching quickly reduce purity.